Flickering lights 5 possible causes

Possible Causes Of Flickering Lights

For most people, a flickering light is annoying.

While you might only make one or two comments about it, it quickly becomes part of your daily life, and you quickly forget it is essential.

You don’t need to be confused. This is something you should worry about!

What can you do if your lights go off? Don’t delay: call a Brisbane North & Sunshine Coast lighting electrician.

Are flickering lights dangerous?

Flickering lights can be dangerous and can indicate a serious electrical problem in your home.

Although it may seem harmless, it could be a sign of a more significant issue with your electrical system.

Like all electrical problems, these could pose a danger and indicate other issues.

  • Overloads of electricity
  • Tripping switches are common
  • Unexpected power surges
  • Electrical fires: Possible danger
  • Increased risk of electrocution

What causes lights to flicker or dim in a house?

A circuit that is too overloaded

If your lights keep blinking, it could be an overloading circuit. This happens when other appliances like a washer or dryer are running.

Circuits that make use of electricity can only handle a certain amount of electricity at a time. Your circuit might be damaged if it is unable to conduct more electricity than necessary. Flickering lights are the most obvious sign.

Large appliances consume more power when they are on.

This reduces the power available for other appliances. It can also affect their performance. It can also cause lights to flicker or dim.

You can do this by expanding your electrical circuits to increase their capacity.

Older, looser electrical wiring

Electricity is a slow-moving electron that seeks to reach the ground fastest (incidentally, this is the original meaning of the phrase “path with least resistance”).

This can lead to circuitry “jumping away” from its intended circuit.

Old, worn-out, or obsolete wiring can cause an electrical current to “jump” off its intended path.

This could cause lights to flicker. This can increase your chances of being electrocuted or in an accident.

Electricity is hot. Any loose connections to electricity can cause heat. This can lead to dangerous temperatures and fire danger.

This is the best method to avoid it. Suppose you suspect there may be loose or obsolete wiring. In that case, it is crucial to inspect your entire electrical wiring and call a local licenced electrician in Brisbane and the Sunshine Coast.

Voltage fluctuations

Flashing lights can be caused by voltage fluctuations or overloads.

Your lights work in the same way as your electrical circuits. Flickering can be caused by voltage fluctuations or power surges.

Flickering lights can be identified by:

  • Unexpected dimming
  • Flickering continues after appliances stop working.
  • Your appliance flickers in a consistent manner

More than drops can cause your lights to go out. Unexpected power surges could cause your lights to have more power than their capabilities.

Your lights will be protected in this case by circuit breakers and other measures.

This could indicate that the necessary measures are not being appropriately taken if this continues.

If you experience fluctuations in your power, it is a good idea to call a professional.

Loose light bulb

A flickering bulb could indicate a problem.

Check the light to ensure it is working correctly.

As we’ve seen, flickering lights can result from the inconsistency of the electrical power coming to the primary source.

You can tighten the bulb socket in these cases by simply screwing it into place.

Please turn off the main switch and wait for it to cool down. Then check for loose connections and tighten them immediately.

It’s better to be safe than sorry, so we recommend hiring an electrician to handle this job. They may be able to diagnose the problem and help determine if there is another issue.

Faulty lights

Replace the light switch immediately if it is damaged or worn.

Flickering is possible. The danger of electrocution can be even more alarming!

A defective light switch could cause electricity to “leak”, shocking everyone who uses them.

Faulty light switches can be caused by loose electrical wiring. These light switches often produce buzzing, popping and flickering sounds.

Why might LED lights flicker?

But what about LED lights? They work differently from traditional light bulbs. LED lights can cause flickering in a different way.

The lights are not the cause of most flickering, but the circuits, sockets, and switches supply electricity. Most LED lights flicker for the same reasons that regular lights.

Do not ignore a flickering light. It is not normal for lights to flicker before they reach full brightness.

You can call a 24-hour electrician.

emergency electrician brisbane sunhine coast

Have you been having problems with flickering lights

On Electrical Contractors can be consulted today for North Brisbane & the Sunshine Coast Areas.

Poor lighting and flickering lights are two areas to be concerned about. These can affect your comfort and signal potential electrical hazards.

Get a certified, local electrician to ensure everything runs smoothly.

On Electrical Contractors provides various electrical services to residential and commercial customers throughout Brisbane & the Sunshine Coast. We can handle any complex or challenging commercial or residential project.

We offer electrical services for commercial, industrial and residential purposes, such as:

  • Inadequate lighting and appliances
  • Blown Fuses
  • Prevention of Electric fires
  • Blackouts due to power failure
  • Solutions to electrical wiring problems
  • Maintenance and inspection of electrical equipment

We fix and maintain any lighting problem, whether indoor or outdoor lighting, safely and efficiently. Contact us at 0416 879 324 today for your local lighting electrician servicing Brisbane North and the Sunshine Coast areas.